Описание

The XTi Series of Crown® amplifiers are professional tools designed and built for portable PA applications. The series includes four models which are similar except for output power: XTi 1000, 2000, 4000 and 6000. All are rugged and lightweight, and offer unmatched value in their class. XTi-Series amplifiers feature an LCD screen with speaker presets for crossover frequencies, EQ, limiting, delay, and a subharmonic synthesizer. Other features include a switch mode universal power supply, useful function indicators, proportional-speed fan-assisted cooling, XLR inputs, Speakon® and binding-post outputs, short-circuit protection and more. With their powerful, reliable performance, XTi-Series amps easily handle 2-ohm loads and are capable of chest-thumping lows. Plus, your investment in an XTi-Series amplifier is backed by Crown’s Three-Year, No-Fault, Fully Transferable Warranty.

Преимущества
Характеристики
Преимущества

  • Integrated speaker presets with LCD front panel display

  • Accurate, uncolored sound with very low distortion for the best in music and voice reproduction

  • Advanced protection circuitry guards against: shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults

  • Extremely versatile, handling a wide range of speaker impedances and outputs

  • Switch-mode universal power supply

  • Speaker presets for crossover frequencies, EQ, limiting, and delay

  • All products fill 2U rack spaces and weigh under 19 lb (24 lb for XTi 6000); weight sets a new standard in lightweight amps

  • Speakon® and binding post outputs, XLR inputs and loop-thrus

  • Comprehensive LED status per channel

  • Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications

Описание
Характеристики
ХАРАКТЕРИСТИКИ

Frequency Response

+0/–1 dB from 20 Hz to 20 kHz at 1 watt into 4 ohms

Load Impedance

Safe with all types of loads. Rated for 2 to 8 ohms in Stereo mode, 4 to 16 ohms in Bridge-Mono mode. The XTi 1000 A1 (100V version) is rated for 4 to 8 ohms Stereo, 8 to 16 ohms Bridge Mono

Sensitivity

1.4V

Signal to Noise Ratio (below rated 1 kHz power at 8 ohms)

103 dB (A weighted)

Damping Factor

Better than 500 from 20 Hz to 400 Hz

Crosstalk

> 70 dB below rated power, 20 Hz to 1 kHz

Input Stage

Input is electronically balanced and employs precision 1% resistors

Input Impedance (nominal)

20 k ohms, balanced;10 k ohms, unbalanced

Maximum Input Signal

+22 dBu typical

AC Line Voltage and Frequency Configurations Available

100V, 120V, 220-240V 50/60 Hz

AC Line Current (120VAC amplifier playing 1/8 power pink noise into 4 ohms per ch)

15.3A; at idle draws no more than
180 watts

Operating Temperature

0° C to 40° C at 95% relative humidity (non-condensing)

Dimensions

EIA Standard 19-in. rack mount
width (EIA RS-310-B), 3.5 in. (8.9 cm) high and 16.2 in. (41.15 cm) deep

Weight

30.0 lb (13.6 kg)

КОНТАКТЫ
Свяжитесь с нами
Часы работы нашего офиса 9:00-19:00 в будние дни. Вы можете посетить наш офис, позвонить нам или заполнить контактную форму и мы обязательно свяжемся с вами в кратчайшие сроки.

Телефон
8 800 100 5466
бесплатно по России
E-mail
Ваше сообщение было успешно отправлено!

Ваш e-mail

Ваше сообщение

Нажимая на кнопку «ОТПРАВИТЬ СООБЩЕНИЕ», я даю согласие на обработку персональных данных

ПАРТНЕРСКИЕ ПРОЕКТЫ

Телефон
8 800 100 5466
бесплатно по России
E-mail

ЗАКАЗАТЬ ЗВОНОК

Получить техническую консультацию

Скоро мы обязательно Вам перезвоним!

Ваш номер телефона

или Ваш email

Нажимая на кнопку «ОТПРАВИТЬ», я даю согласие на обработку персональных данных

Заказать звонок

Скоро мы обязательно Вам перезвоним!

Ваш номер телефона

Нажимая на кнопку «ЗАКАЗАТЬ», я даю согласие на обработку персональных данных