Symetrix EDGE Frame

Processors

1 x Analog Devices SHARC 21489 @ 400 MHz SIMD.

Raw processing capacity

400 MIPS, 1.6 GFLOPS.

Sampling Rate

48 kHz, ± 100 ppm.

Frequency Response (A/D/A)

20 Hz – 20 kHz, ± 0.5 dB.

Dynamic Range (A/D/A)

> 114 dB, A-weighted.

Channel Separation (A/D/A)

> 108 dB @ 1 kHz, +24 dBu.

Latency (A/D/A)

0.88 mS, inputs routed to outputs.

Delay memory

174 mono seconds per Edge frame.

Analog control inputs

0-3.3 VDC.

Recommended external control potentiometer

10k Ohm, linear.

Logic outputs

Low (0V) when active, pulled high (5V) when inactive.

Logic output maximum external power supply voltage

24 VDC.

Logic output maximum external power supply current sinking

50 mA.

Logic output maximum output current

10 mA.

RS-232 accessory serial I/O

38.4 kbaud (default), 8 data bits, 1 stop bit, no parity, no flow control wired straight-through, only pins 2, 3, and 5 required.

RS-485 serial I/O

38.4 kbaud (default) 8 data bits, 1 stop bit, no parity, no flow control. May be broken out of ARC port.

Ethernet Cable

Standard CAT5, maximum device to device length = 100 meters.

Dante Cable

Standard CAT6, maximum device to device length = 100 meters.

ARC Cable

Standard CAT5, distance dependent upon load and number of devices.

Maximum devices per system

32 units per Site File.

Maximum stored presets

1000.