Martin M2GO Lighting Console

L x W x H

300 mm (11.9 in.) x 540 mm (21.3 in.) x 99 mm (3.9 in.)

Weight

5.2 kg (11.5 lbs.)

Protocol

DMX512A (RDM), Artnet2 4 DMX universes, expandable to 8 2048 channels, expandable to 4096

Main playback interface

- Ten 60 mm playback faders, each with four function- assignable buttons
- Eight customizable multi-function keys
- Playback Select button
- Master Go section with Go, Pause, Snap and Release
- Four digital rotary encoders with push function and status LED for fixture parameter control
- 3.5” touchscreen for parameter groups, effect parameters, fanning and global timings Grand master rotary fader and button
- Blind/preview button
- Customizable highlight/lowlight function
- Customizable parameter defaults
- Next/last fixtures/groups
- Large command keys

Hardware

- Industrial 3.5" RGB touchscreen
- Internal 32 GB SSD storage drive
- Industrial motherboard with dual-core processor 4 GB RAM
- Integrated graphics processor

Software

- Industrial Windows 7 embedded OS
- OS installation by USB storage device
- Show backup on SSD disk or USB storage device (not included) Supports - - Elo USB and generic Windows 7-compatible touch devices

4 x DMX universe outputs

5-pin locking XLR

External monitor screen

VGA and HDMI

Artnet for up to 8 DMX universes in total

Gigabit RJ-45

MaxNet controller link

Gigabit RJ-45

5 x storage media/hardware peripherals

USB 2.0

Ready to receive internal MIDI module and SMPTE timecode module

Yes

Internal MIDI in/out/thru (MIDI show control, MIDI notes, MIDI timecode)

Optional

Internal SMPTE Timecode In/Out

3-pin XLR (optional)

12 VDC power supply input

4-pin XLR

Desk lamp (dimmable)

XLR

AC mains power to 12 VDC external PSU (included)

100-240 V nominal, 50/60 Hz

Maximum current

1.4 A

12 VDC output

5 A, 60 W max.

Included Items

- 1.5 m power cable, EU (Schuko), 3-pin IEC
- 1.5 m power cable, US, 3-pin IEC
- MW 12 VDC 5 A external PSU
- Martin ShowDesigner 6TM Lite 3D Visualizer 180-day trial Console lid